Power requirements |
12 V DC, 4 A max (if tuning “medium” or better) |
Internal battery |
14 A-h, gives 3.5 to 4.5 hours of use (if tuning “medium” or better) |
Antenna type |
1×2 m loops, 4 turns for TX, 1 turn for RX; 2 loops can be connected |
Transmit power |
62 dBuA/m @ 10 m on axis of one antenna (this is within ETSI EN300–330 limit) |
Operating frequencies |
125 kHz transmit; 6.8 MHz receive tag signal |
Real Time Clock |
Time set by PC application and RS232 connection to reader |
Communications |
USB Serial for diagnostics & setup, Ethernet data output |
Auto-tuning |
Operates on switch-on; can be invoked manually by push-button on front panel |
Controls |
ON switch, Auto-tune push-button, Synch push-button (inserts digital marker into data stream) |
Indicators |
Tuning LED (Green–Yellow–Red) LED indicating “good” – “medium” – “bad” for each transmit output |
Battery voltage level LED (Green–Yellow–Red), indicating “high” – “medium” – “low” charge states |
Valid ID received & sent; Reader ready status |
LAN (Ethernet) activity |
Data output |
Continuous flow of tag IDs as they are read, with time stamps |
Performance |
Read range: 1.3 m using STK tag (57×46×1.8 mm laminated); 1.5 m using ISO size DF tag |
Max tag speed: 10 m/sec using STK tags |
Physical |
440×220×340 mm box, Watertight, crushproof, and dust proof with Double Throw latches |
Weight: 10.0 kg without antennas |